ISO 3312:1987-ed.2.0..
ISO 3325:1996-ed.2.0..
ISO 3327:2009-ed.3.0..
ISO 3738-1:1982
ISO 3738-2:1988
ISO 376:2011-ed.4.0..
Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 61788-6-ed.3.0
Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
STANDARD published on 11.7.2011
The information about the standard:
Designation standards: IEC 61788-6-ed.3.0
Publication date standards: 11.7.2011
SKU: NS-413740
The number of pages: 66
Approximate weight : 198 g (0.44 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Measurement of electrical and magnetic quantitiesConducting materialsMechanical testing of metals
Annotation of standard text IEC 61788-6-ed.3.0 :
IEC 61788-6:2011 covers a test method detailing the tensile test procedures to be carried out on Cu/Nb-Ti superconductive composite wires at room temperature. This test is used to measure modulus of elasticity, 0,2 % proof strength of the composite due to yielding of the copper component, and tensile strength. The value for percentage elongation after fracture and the second type of 0,2 % proof strength due to yielding of the Nb-Ti component serves only as a reference. The sample covered by this test procedure has a round or rectangular cross-section with an area of 0,15 mm2 to 2 mm2 and a copper to superconductor volume ratio of 1,0 to 8,0 and without the insulating coating. This third edition cancels and replaces the second edition published in 2008. It constitutes a technical revision which adds a new Annex C including specific examples of uncertainty estimation related to mechanical tests. La CEI 61788-6:2011 specifie une methode dessai detaillant les modes operatoires dessai de traction a executer sur des fils composites supraconducteurs de Cu/Nb-Ti a temperature ambiante. Cet essai est utilise pour mesurer le module delasticite, la charge depreuve a 0,2 % du composite due a la deformation du composant de cuivre et a la resistance a la traction. La valeur du pourcentage dallongement apres fracture et le second type de charge depreuve a 0,2 % due a la deformation du composant en Nb-Ti ne servent que de reference. Lechantillon specifie par le present mode operatoire dessai a une section transversale circulaire ou rectangulaire avec une surface de 0,15 mm2 a 2 mm2 et un rapport volumique entre le cuivre et le supraconducteur de 1,0 a 8,0 et sans revetement isolant. Cette troisieme edition annule et remplace la deuxieme edition parue en 2008. Elle constitue une revision technique avec lajout dune Annexe C decrivant un exemple specifique destimation dincertitude concernant les essais mecaniques.
Similar standards:
16.7.1987
31.10.1996
28.4.2009
1.10.1982
29.12.1988
7.6.2011
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
