Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 61823-ed.1.0
Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
STANDARD published on 13.12.2002
The information about the standard:
Designation standards: IEC 61823-ed.1.0
Publication date standards: 13.12.2002
SKU: NS-413780
The number of pages: 22
Approximate weight : 66 g (0.15 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 61823-ed.1.0 :
IEC 61823:2002 specifies the characteristics of aeronautical ground lighting series trans-formers (AGLST) used in aeronautical ground lighting for 6,6 A series circuits, at a service voltage of up to 5 kV, supplied by constant current regulators up to 30 kVA in rating. AGL series transformers provide power to airport lighting luminaires or other loads (resistive) from their secondary circuits. The AGL series transformers provide continuity of the series circuit in the event of a loss of the load on the transformer, and electrical isolation between the primary circuit supplied by a constant current regulator, and the secondary circuit connected to the load under conditions defined in this standard. This bilingual version (2016-11) corresponds to the English version, published in 2002-12. LIEC 61823:2002 specifie les caracteristiques des transformateurs serie utilises pour le balisage aeronautique au sol (AGLST) pour des circuits serie de 6,6 A, dont la tension de service atteint 5 kV, alimentes par des regulateurs de courant constant jusqua 30 kVA. Les transformateurs serie AGL assurent lalimentation des feux aeronautiques de balisage ou dautres charges (resistives) a partir de leurs circuits secondaires. Les transformateurs serie AGL assurent la continuite du circuit serie en cas de perte de charge sur le transformateur, et lisolation electrique entre le circuit primaire alimente par un regulateur de courant constant et le circuit secondaire connecte a la charge dans des conditions definies dans la presente Norme. La presente version bilingue (2016-11) correspond a la version anglaise monolingue publiee en 2002-12.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
