Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 62047-35-ed.1.0
Semiconductor devices - Micro-electromechanical devices - Part 35: Test method of electrical characteristics under bending deformation for flexible electro-mechanical devices
Translate name
STANDARD published on 22.11.2019
The information about the standard:
Designation standards: IEC 62047-35-ed.1.0
Publication date standards: 22.11.2019
SKU: NS-977284
The number of pages: 41
Approximate weight : 123 g (0.27 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 62047-35-ed.1.0 :
IEC 62047-35:2019 specifies the test method of electrical characteristics under bending deformation for flexible electromechanical devices. These devices include passive micro components and/or active micro components on the flexible film or embedded in the flexible film. The desired in-plane dimensions of the device for the test method ranges typically from 1 mm to 300 mm and the thickness ranges from 10 mm to 1 mm, but these are not limiting values. The test method is so designed as to bend devices in a quasi-static manner monotonically up to the maximum possible curvature, i.e. until the device is completely folded, so that the entire degradation behaviour of the electric property under bending deformation is obtained. This document is essential to estimate the safety margin under a certain bending deformation and indispensable for reliable design of the product employing these devices. L’IEC 62047-35:2019 specifie la methode d’essai des caracteristiques electriques sous deformation par courbure de dispositifs electromecaniques souples. Ces dispositifs incluent des microcomposants passifs et/ou des microcomposants actifs situes sur ou integres dans le film souple. Typiquement, les dimensions dans le plan souhaitees du dispositif pour la methode d’essai sont comprises entre 1 mm et 300 mm, et l’epaisseur est comprise entre 10 mm et 1 mm. Ces valeurs ne sont pas limitatives. La methode d’essai est concue pour plier les dispositifs de maniere quasi statique et monotone, jusqu’a la courbure maximale possible, c’est-a-dire jusqu’a ce que le dispositif soit completement plie, afin d’obtenir le comportement des proprietes electriques sous degradation complete, lors d’une deformation par courbure. Le present document est essentiel pour estimer la marge de securite lors d’une certaine deformation par courbure et indispensable pour concevoir de maniere fiable des produits qui utilisent ces dispositifs.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
