Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC 62153-4-17-ed.1.0
Metallic cables and other passive components - Test methods - Part 4-17: Electromagnetic compatibility (EMC) - Reduction Factor
Translate name
STANDARD published on 15.8.2018
The information about the standard:
Designation standards: IEC 62153-4-17-ed.1.0
Publication date standards: 15.8.2018
SKU: NS-858615
The number of pages: 21
Approximate weight : 63 g (0.14 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Annotation of standard text IEC 62153-4-17-ed.1.0 :
IEC 62153-4-17:2018 applies to the testing of the reduction factor of multi-element metallic cables used in analogue and digital communication and control. The described method is generally applicable to all screened metallic cables. The reduction factor describes the screening effectiveness of a cable screen at frequencies below 1 kHz with a ratio of voltages describing the screened and unscreened situation. During the measurement, the cable under test is connected to a specific current loop arrangement. LIEC 62153-4-17:2018 sapplique aux essais sur le facteur de reduction de cables metalliques a elements multiples utilises pour les communications et les commandes analogiques et numeriques. La methode decrite est generalement applicable a tous les cables metalliques ecrantes. Le facteur de reduction decrit lefficacite dun ecran de cable a des frequences inferieures a 1 kHz par un rapport de tensions decrivant la situation ecrantee et non ecrantee. Pendant la mesure, le cable en essai est raccorde a une boucle de courant specifique.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
