Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
IEC/TR 60909-2-ed.2.0
Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations
STANDARD published on 13.11.2008
The information about the standard:
Designation standards: IEC/TR 60909-2-ed.2.0
Publication date standards: 13.11.2008
SKU: NS-407638
The number of pages: 43
Approximate weight : 129 g (0.28 lbs)
Country: International technical standard
Category: Technical standards IEC
The category - similar standards:
Electricity. Magnetism. General aspectsPower transmission and distribution lines
Annotation of standard text IEC/TR 60909-2-ed.2.0 :
IEC 60909-2:2008(E) comprises data of electrical equipment collected from different countries to be used when necessary for the calculation of short-circuit currents in accordance with IEC 60909-0. It may be applied for calculating short-circuit currents in low-voltage networks if they are in accordance with typical equipment employed in the users country. The collected data and their evaluation may be used for medium- or high-voltage planning purposes and also for comparison with data given by manufacturers or electricity suppliers. For overhead lines and cables the electrical data may in some cases also be calculated from the physical dimensions and the material following the equations given in this report. This second edition cancels and replaces the first edition published in 1992 and constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows: - Subclause 2.5 gives equations and examples for the calculation of the positive-, the negative- and the zero-sequence impedances and reduction factors for high-, medium and low-voltage cables with sheaths and shields earthed at both ends. - Subclause 2.7 gives equations and figures for the calculation of the positive-sequence impedances of busbar configurations.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
