Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ISO 13232-6:2005-ed.2.0
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 6: Full-scale impact-test procedures
Automatically translated name:
Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 6: Full-scale impact-test procedures
STANDARD published on 8.12.2005
The information about the standard:
Designation standards: ISO 13232-6:2005-ed.2.0
Publication date standards: 8.12.2005
SKU: NS-424499
The number of pages: 50
Approximate weight : 150 g (0.33 lbs)
Country: International technical standard
Category: Technical standards ISO
The category - similar standards:
Annotation of standard text ISO 13232-6:2005-ed.2.0 :
Description / Abstract: ISO 13232-6:2005 specifies minimum requirements for: paired comparison tests;the preparation of the dummy, motorcycle and opposing vehicle;the repeatability and reproducibility of impact test conditions within and between test sites;the minimization of variation in secondary test variables;realistic and representative impact conditions for full-scale impact tests; anda means to verify analytical evaluations of proposed rider crash protective devices fitted to motorcycles, such as computer simulation. ISO 13232 specifies the minimum requirements for research into the feasibility of protective devices fitted to motorcycles, which are intended to protect the rider in the event of a collision. ISO 13232 is applicable to impact tests involving: two-wheeled motorcycles;the specified type of opposing vehicle;either a stationary and a moving vehicle or two moving vehicles;for any moving vehicle, a steady speed and straight-line motion immediately prior to impact;one helmeted dummy in a normal seating position on an upright motorcycle;the measurement of the potential for specified types of injury by body region;evaluation of the results of paired impact tests (i.e. comparisons between motorcycles fitted and not fitted with the proposed devices); andevaluation of inflatable/triggered protective device. ISO 13232-6 does not apply to testing for regulatory or legislative purposes.
These changes apply to this standard:
ISO 13232-6:2005-ed.2.0/Amd1:2012
Change
Show all technical information.
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 6: Full-scale impact-test procedures — Amendment 1: MATD test helmet
(Motocycles — Méthodes d´essai et d´analyse de l´évaluation par la recherche des dispositifs, montés sur les motocycles, visant a la protection des motocyclistes contre les collisions — Partie 6: Méthodes d´essai de choc en vraie grandeur — Amendement 1: Casque d´essai MATD)
Change published on 12.7.2012
Selected format:Show all technical information.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
