Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ISO 16063-12:2002
Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method
Automatically translated name:
Methods for the calibration of vibration and shock transducers -- Part 12: Primary vibration calibration by the reciprocity method
STANDARD published on 25.4.2002
The information about the standard:
Designation standards: ISO 16063-12:2002
Publication date standards: 25.4.2002
SKU: NS-426839
The number of pages: 20
Approximate weight : 60 g (0.13 lbs)
Country: International technical standard
Category: Technical standards ISO
The category - similar standards:
Annotation of standard text ISO 16063-12:2002 :
Description / Abstract: This part of ISO 16063 specifies the instrumentation and procedures to be used for primary calibration of accelerometers using the reciprocity method and the SI system of units. It is applicable to the calibration of rectilinear accelerometers over a frequency range of 40 Hz to 5 kHz and a frequency-dependent amplitude range of 10 m/s2 to 100 m/s 2 and is based on the use of the coil of an electrodynamic vibrator as the reciprocal transducer. Calibration of the sensitivity of a transducer can be obtained using this part of ISO 16063 provided that the signal conditioner or amplifier used with the transducer during calibration has been adequately characterized. In order to achieve these measurement uncertainties, it has been assumed that the transducer has been calibrated in combination with its signal conditioner or amplifier (the combination of which in this part of ISO 16063 is referred to as the accelerometer).
These corrections apply to this standard:
ISO 16063-12:2002/Cor1:2008
Correction
Show all technical information.
Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method — Technical Corrigendum 1
(Méthodes pour l´étalonnage des transducteurs de vibrations et de chocs — Partie 12: Étalonnage primaire de vibrations par méthode réciproque — Rectificatif technique 1)
Correction published on 15.9.2008
Selected format:Show all technical information.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
