Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ISO 16063-21:2003
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer
Automatically translated name:
Methods for the calibration of vibration and shock transducers -- Part 21: Vibration calibration by comparison to a reference transducer
STANDARD published on 19.8.2003
The information about the standard:
Designation standards: ISO 16063-21:2003
Publication date standards: 19.8.2003
SKU: NS-426844
The number of pages: 29
Approximate weight : 87 g (0.19 lbs)
Country: International technical standard
Category: Technical standards ISO
The category - similar standards:
Annotation of standard text ISO 16063-21:2003 :
Description / Abstract: ISO 16063-21:2003 describes the calibration of rectilinear vibration transducers by comparison. Although it mainly describes calibration using direct comparison to a standard calibrated by primary methods, the methods described can be applied between other levels in the calibration hierarchy. ISO 16063-21:2003 specifies procedures for performing calibrations of rectilinear vibration transducers by comparison in the frequency range from 0,4 Hz to 10 kHz. It is primarily intended for those who are required to meet ISO standardized methods for the measurement of vibration under laboratory conditions, where the uncertainty of measurement is relatively small. It can also be used under field conditions, where the uncertainty of measurement may be relatively large. From knowledge of all significant sources of uncertainty affecting the calibration, the expanded uncertainty can be evaluated using the methods given in ISO 16063-21. It also covers the assessment of uncertainties for calibrations performed using a check standard. This document is applicable to calibrations outside the frequency range from 0,4 Hz to 10 kHz, considering the additional facts described in 4.3. Systems have been demonstrated to cover the range from 0,01 Hz to 30 kHz.
These changes apply to this standard:
ISO 16063-21:2003/Amd1:2016
Change
Show all technical information.
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 1
(Méthodes pour l´étalonnage des transducteurs de vibrations et de chocs — Partie 21: Étalonnage de vibrations par comparaison a un transducteur de référence — Amendement 1)
Change published on 2.2.2016
Selected format:Show all technical information.
ISO 16063-21:2003/Amd2:2024
Change
Show all technical information.
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 2
(Méthodes pour l´étalonnage des transducteurs de vibrations et de chocs — Partie 21: Étalonnage de vibrations par comparaison a un transducteur de référence — Amendement 2)
Change published on 19.11.2024
Selected format:Show all technical information.
These corrections apply to this standard:
ISO 16063-21:2003/Cor1:2009
Correction
Show all technical information.
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Technical Corrigendum 1
(Méthodes pour l´étalonnage des transducteurs de vibrations et de chocs — Partie 21: Étalonnage de vibrations par comparaison a un transducteur de référence — Rectificatif technique 1)
Correction published on 3.4.2009
Selected format:Show all technical information.
We recommend:
Updating of laws
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
