Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ISO 16592:2012-ed.2.0
Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method
Automatically translated name:
Microbeam analysis -- Electron probe microanalysis -- Guidelines for determining the carbon content of steels using a calibration curve method
STANDARD published on 31.7.2012
The information about the standard:
Designation standards: ISO 16592:2012-ed.2.0
Publication date standards: 31.7.2012
SKU: NS-427176
The number of pages: 12
Approximate weight : 36 g (0.08 lbs)
Country: International technical standard
Category: Technical standards ISO
The category - similar standards:
Annotation of standard text ISO 16592:2012-ed.2.0 :
Description / Abstract: ISO 16592:2012 gives guidance on a method for the determination of the carbon content in steels containing other alloying elements (less than 1 % to 2 % by mass) using the calibration curve method. It specifies the sample preparation, X-ray detection, establishment of the calibration curve and the procedure for the determination of the uncertainty of the measured carbon content. It is applicable to steels containing a mass fraction of carbon of less than 1,0 %. The method is not applicable to steels with higher carbon contents, which could significantly affect the accuracy of the analysis results. ISO 16592 applies to analyses performed using normal beam incidence and wavelength-dispersive X-ray spectrometry; it is not designed to be used for energy-dispersive X-ray spectrometry.
We recommend:
Updating of laws
Do you want to be sure about the validity of used regulations?
We offer you a solution so that you could use valid and updated legislative regulations.
Would you like to get more information? Look at this page.
