Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ISO 9022-17:2015-ed.2.0
Optics and photonics — Environmental test methods — Part 17: Combined contamination, solar radiation
Automatically translated name:
Optics and photonics -- Environmental test methods -- Part 17: Combined contamination, solar radiation
STANDARD published on 25.3.2015
The information about the standard:
Designation standards: ISO 9022-17:2015-ed.2.0
Publication date standards: 25.3.2015
SKU: NS-583772
The number of pages: 5
Approximate weight : 15 g (0.03 lbs)
Country: International technical standard
Category: Technical standards ISO
The category - similar standards:
Annotation of standard text ISO 9022-17:2015-ed.2.0 :
Description / Abstract: ISO 9022-17:2015 specifies the methods relating to the environmental tests of optical instruments and including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices) under equivalent conditions, for their ability to resist the influence of combined contamination and solar radiation. "Contamination", as used in ISO 9022-17:2015, means the contact of optical instruments with corrosive chemical substances (hereafter called test agents). Complete instruments or assemblies are, however, not be tested to ISO 9022-17:2015 except for special reasons (refer to ISO 9022-12). As a rule, representative substrates are used as specimens. The tests described in ISO 9022-17:2015 are designed for the selection of materials and components for instruments likely to be subjected to combined contamination and solar radiation during service life, rather than for regular production control. The purpose of testing is to investigate the resistance of an instrument, and in particular, of instrument surfaces, coatings, or synthetic materials, to a short-time exposure to the test agents combined with solar radiation.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
