Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
ISO/IEC 14443-3-ed.4.0
Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision
Translate name
STANDARD published on 19.6.2018
The information about the standard:
Designation standards: ISO/IEC 14443-3-ed.4.0
Publication date standards: 19.6.2018
SKU: NS-941013
The number of pages: 56
Approximate weight : 168 g (0.37 lbs)
Country: International technical standard
Category: Technical standards ISO
The category - similar standards:
Annotation of standard text ISO/IEC 14443-3-ed.4.0 :
This document describes the following: - polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD); - the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs; - the initial Request and Answer to Request command content; - methods to detect and communicate with one PICC among several PICCs (anticollision); - other parameters required to initialize communications between a PICC and PCD; - optional means to ease and speed up the selection of one PICC among several PICCs based on application criteria; - optional capability to allow a device to alternate between the functions of a PICC and a PCD to communicate with a PCD or a PICC, respectively. A device which implements this capability is called a PXD. Protocol and commands used by higher layers and by applications and which are used after the initial phase are described in ISO/IEC 14443-4. This document is applicable to PICCs of Type A and of Type B (as described in ISO/IEC 14443-2), to PCDs (as described in ISO/IEC 14443-2) and to PXDs. NOTE 1 Part of the timing of data communication is defined in ISO/IEC 14443-2. NOTE 2 Test methods for this document are defined in ISO/IEC 10373-6.
These changes apply to this standard:
ISO/IEC 14443-3-ed.4.0/Amd.2
Change
Show all technical information.
Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision - Amendment 2: Enhancements for harmonization
Change published on 5.8.2020
Selected format:Show all technical information.
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
