Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
SAE J542
STARTING MOTOR MOUNTINGS
Automatically translated name:
Starting Motor Mountings
STANDARD published on 1.6.1991
The information about the standard:
Designation standards: SAE J542
Publication date standards: 1.6.1991
SKU: NS-487105
Country: American technical standard
Category: Technical standards SAE
Annotation of standard text SAE J542 :
The purpose of this SAE Recommended Practice is to provide standardized dimensions for mounting starting motors. (See Figures 1 through 4.)
It is recommended that a full register diameter having a minimum depth of 2.54 mm (0.100 in) be provided in the flywheel housing to insure proper control of gear center distance and clearance between pitch diameters. The clearance between the starting motor pilot diameter and the register diameter in the flywheel housing should be 0.03 mm (0.001 in) minimum to 0.25 mm (0.010 in) maximum.
Text noted with an asterisk in Figures 1, 2, and 3, should not exceed root radius of pinion in order to provide clearance for the flywheel.
The face of the starting motor mounting flange should be relieved at its junction with the pilot diameter to avoid mounting interference with flywheel housing.
For backlash allowance between the pinion and ring gear refer to SAE J543.
Dimensional units—millimeter (inch)
SUBJECT TAXONOMY: Electrical, Electronics, and Avionics, Electrical systems, Parts, Mountings
SUBFILE: Automotive
TYPE OF DOCUMENT: Ground Vehicle Standard
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
