Cookies
We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
SAE J740
Countersunk Square Holes for Cutting Edges and End Bits
Translate name
STANDARD published on 1.10.2011
The information about the standard:
Designation standards: SAE J740
Publication date standards: 1.10.2011
SKU: NS-664024
Country: American technical standard
Category: Technical standards SAE
Annotation of standard text SAE J740 :
To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116.
Cutting edges are further defined in SAE J737, J739 and J1304.
End bits are further defined in SAE J63.
1
When section thickness exceeds A in drawing 1 (Figure 2) (countersunk one side) or B in drawing 4 (countersunk both sides), use counterbore with diameter D, as shown in cross section drawings 2, 5 and 6, or extended countersink C, as shown in cross section drawings 3 and 7.
2
The inscribed circle of the square holes shall be concentric with countersink or counterbore within 0.03 in (0.8 mm).
SUBJECT TAXONOMY: Manufacturing equipment and machinery, Construction vehicles and equipment, Industrial vehicles and equipment
SUBFILE: Commercial Vehicle
TYPE OF DOCUMENT: Ground Vehicle Standard
Stabilized: Oct 2011 
We recommend:
Technical standards updating
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
