Perspectives on Integrating Structural Health Monitoring Systems into Fixed-Wing Military Aircraft

Standard published on 1.8.2026

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing, Part 0 - Introduction

Standard published on 1.8.2026

Aluminum Alloy, Alclad Sheet (6156-T4) 1.0Si - 0.90Cu - 0.60Mn - 0.90Mg Solution Heat Treated and Naturally Aged

Standard published on 1.8.2026

Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High-Temperature, 30Au - 34Pd - 36Ni, 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range

Standard published on 1.8.2026

Manganese Bronze, Sand and Centrifugal Castings, 65Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe, High Strength, As Cast

Standard published on 1.8.2026

Iron-Nickel Alloy, Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al (Ni-Span-C® 902), Solution Heat Treated, Cold Rolled, 50% Reduction

Standard published on 1.8.2026

Steel Corrosion-Resistant Investment Castings, Vacuum Melted, Vacuum Cast, 13Cr - 8.0Ni - 2.2Mo - 1.1Al (PH 13-8 Mo), Homogenized, Solution, and Precipitation Heat Treated (Condition H1000)

Standard published on 1.8.2026

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire, 70Ni - 2.5Mn - 15.5Cr - 3.0Ti - 7.0Fe (Inconel® FM92)

Standard published on 1.8.2026

Steel, Corrosion-Resistant, Wire, 17Cr - 7.1NI - 1.1Al (17-7 PH®), Cold Drawn, Precipitation-Hardenable

Standard published on 1.8.2026

Steel, Corrosion- and Heat-Resistant, Wire, 17Cr - 12Ni - 2.5Mo (SAE 316), Solution Heat Treated

Standard published on 1.8.2026