Copper-Nickel-Tin Alloy, Bars and Rods, 77Cu - 15Ni - 8Sn, Solution Annealed, Cold Finished, and Spinodal Hardened (TX TS)

Standard published on 1.9.2026

Leaded Red Brass, Sand and Centrifugal Castings, 85Cu - 5.0Sn - 5.0Pb - 5.0Zn, As Cast

Standard published on 1.9.2026

Manganese Bronze, Sand and Centrifugal Castings, 58Cu - 39Zn - 1.2Fe - 1.0Al - 0.80Mn, As Cast

Standard published on 1.9.2026

Titanium Alloy, Bars, Wire, Forgings, and Rings, 6Al - 6V - 2Sn, Annealed, Heat Treatable

Standard published on 1.9.2026

Titanium Alloy, Investment Castings 6Al - 4V, 130 UTS, 120 YS,6% EL, Hot Isostatically Pressed, Anneal Optional or When Specified

Standard published on 1.9.2026

Steel, Corrosion-Resistant, Investment Castings, 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu (15-5 PH®), Solution Heat Treated, Precipitation Hardenable

Standard published on 1.9.2026

Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings, 60Co - 29Cr - 4.5W (Stellite® 6), As Cast

Standard published on 1.9.2026

Steel, Corrosion-Resistant, Investment Castings, 15Cr - 4.6Ni - 0.22Cb - 2.8Cu (15–5 PH®), Solution and Precipitation Heat Treated (H935), 170 ksi (1172 MPa) Tensile Strength

Standard published on 1.9.2026

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings, 61Ni - 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.85Cb, (Nb) - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.05Zr (738), Vacuum Melted, Vacuum Cast, As Cast, or Solution Treated, or Solution and Precipitation Hardened

Standard published on 1.9.2026

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Forging and Ring Stock, Mechanical Tubing, and Rings, 12Cr (410 MOD), Ferrite Controlled, Annealed, Consumable Electrode Melted

Standard published on 1.9.2026