Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Bars - a or D <= 200 mm - Rm >= 1 310 MPa (Endorsed by Asociación Espanola de Normalización in July of 2026.)

Standard published on 1.7.2026

Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Bars - a or D <= 200 mm - Rm >= 930 MPa (Endorsed by Asociación Espanola de Normalización in July of 2026.)

Standard published on 1.7.2026

Guide for addressing climate change adaptation in standards (Endorsed by Asociación Espanola de Normalización in July of 2026.)

Standard published on 1.7.2026

Rubber, vulcanized or thermoplastic. Determination of tear strength. Part 2: Small (Delft) test pieces

Standard published on 8.7.2026

Dentistry - Coupling dimensions for handpiece connectors - Part 1: Mechanical properties (ISO 3964-1:2026) (Endorsed by Asociación Espanola de Normalización in July of 2026.)

Standard published on 1.7.2026

Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2025)

Standard published on 8.7.2026

Energy management systems — Requirements for bodies providing audit and certification of energy management systems

Standard published on 1.7.2026

Railway applications - Driver´s cab Train Display Controller (TDC) - Part 3: Other Train Systems FIS (Endorsed by Asociación Espanola de Normalización in July of 2026.)

Standard published on 1.7.2026

Railway applications - Fixed installations - High-voltage/low-voltage prefabricated substations in AC and DC electric traction systems (Endorsed by Asociación Espanola de Normalización in July of 2026.)

Standard published on 1.7.2026

Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 3: Calculation procedures regarding adaptive building envelope elements - Amendment 1: Reference control scenarios for adaptive building envelope elements with dynamic solar shading or chromogenic glazing (ISO 52016-3:2023/Amd 1:2025)

Change published on 8.7.2026