We need your consent to use the individual data so that you can see information about your interests, among other things. Click "OK" to give your consent.
Standard Test Method for Measuring Flatness, Thickness, and Thickness Variation on Silicon Wafers by Automated Noncontact Scanning
STANDARD published on 1.1.1994
Designation standards: ASTM F1530-94
Note: WITHDRAWN
Publication date standards: 1.1.1994
SKU: NS-50645
The number of pages: 7
Approximate weight : 21 g (0.05 lbs)
Country: American technical standard
Category: Technical standards ASTM
Keywords:
Flatness-semiconductors, Noncontact technique, Nondestructive evaluation (NDE)-semiconductors, Probe methods, Silicon semiconductors-slices/wafers, Silicon semiconductors-slices/wafers, Thickness-semiconductors, Thickness variation, Wafers, silicon wafers-flatness/thickness/thickness variation, by automated, noncontact scanning, test, ICS Number Code 29.045 (Semiconducting materials)
1. Scope |
1.1 This test method covers a noncontacting, non-destructive procedure to determine the thickness and flatness of clean, dry, semiconductor wafers in such a way that no physical reference is required. 1.2 This test method is applicable to wafers 50 mm or larger in diameter, and 100 [mu]m (0.004 in.) approximately and larger in thickness, independent of thickness variation and surface finish, and of wafer shape. 1.3 This test method measures the flatness of the front wafer surface as it would appear relative to a specified reference plane when the back surface of the water is ideally flat, as when pulled down onto an ideally clean, flat chuck. It does not measure the free-form shape of the wafer. 1.4 Because no chuck is used as a measurement reference, this test method is relatively insensitive to microscopic particles on the back surface of the wafer. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
Do you want to make sure you use only the valid technical standards?
We can offer you a solution which will provide you a monthly overview concerning the updating of standards which you use.
Would you like to know more? Look at this page.
Latest update: 2024-05-07 (Number of items: 2 897 585)
© Copyright 2024 NORMSERVIS s.r.o.